Common mistakes when using a flat hose (and how to avoid them)
The flat hose is a very practical solution for emptying swimming pools and tanks. and drain water. However, many problems with bursts, low flow, or leaks should not be to the product itself, but to incorrect use .
In this article we review the most common mistakes when using a flat hose And we'll explain how to avoid them to extend their lifespan and improve performance. and work safely.
Index
- Not choosing the correct diameter
- Use it with pressures that are not recommended.
- Not securing the connections properly
- Fold or crease it with water inside
- Drag it over abrasive surfaces
- Use it for vacuuming when it is not appropriate
- Store it wet or poorly rolled up
- Conclusion
1️⃣ Not choosing the right diameter
One of the most common mistakes is using a flat hose with an insufficient diameter for the volume of water that is to be evacuated.
What happens
- Very low flow rate.
- Longer emptying time.
- Greater effort for the pump.
How to avoid it
Choose the diameter based on the use:
- Small volumes → small diameter.
- Medium-sized pools or tanks → medium diameter.
- Large volumes → large diameter.
2️⃣ Use it with non-recommended pressures
Not all flat hoses are designed to withstand high pressures. Connecting them to overly powerful pumps can cause breakage.
What happens
- Deformations.
- Leaks.
- Premature rupture.
How to avoid it
Always check the maximum pressure recommended by the manufacturer. and use a compatible pump.
3️⃣ Not securing the connections properly
Poorly adjusted connections are one of the main causes of water leaks and accidents.
What happens
- Constant leaks.
- Disconnections during use.
- Loss of pressure.
How to avoid it
- Use quality clamps.
- Secure the connectors well.
- Check the connections before starting.
4️⃣ Fold or crease it with water inside
Bending a flat hose while it is full of water can damage its internal structure.
What happens
- Permanent creases.
- Reduction of flow rate.
- Internal ruptures.
How to avoid it
Empty the hose completely before moving or storing it.
5️⃣ Drag it over abrasive surfaces
Although they are resistant, flat hoses are not designed to be dragged continuously over stones or sharp edges.
What happens
- Exterior wear.
- Punctures.
- Reduced lifespan.
How to avoid it
Position the hose avoiding unnecessary friction and protect it. in critical areas.
6️⃣ Use it for vacuuming when it is not suitable
The flat hose is designed primarily for for pumping and drainage , not for suction.
What happens
- It collapses due to vacuum.
- It deforms.
- It doesn't vacuum properly.
How to avoid it
Always use a suction hose for vacuuming. The flat hose is ideal for water outlet.
👉 If you want to better understand how it works: How a flat hose works .
7️⃣ Store it wet or poorly rolled up
Improper storage drastically reduces the lifespan of the hose.
What happens
- Bad smells.
- Deformations.
- Damaged material.
How to avoid it
- Empty and dry the hose after use.
- Roll it up without sharp creases.
- Store it in a dry place away from the sun.
Conclusion
Most problems with a flat hose are not due to the product itself. but rather to improper use. Avoiding these errors extends its lifespan. It improves performance and ensures safe work.
Choose a quality flat hose and use it correctly It is the best long-term investment.
See recommended flat hoses
At Flexigobe you will find durable flat hoses, compatible with pumps and designed for safe and long-lasting use.
